clear cache on mac for wifi access points

#Clear cache on mac for wifi access points update#
#Clear cache on mac for wifi access points software#

Tap/contactless payments aren’t recognized It’s possible the issue may be isolated to one port. Try plugging the USB hardware accessory into a different port. To determine whether there is an issue with the hub or with the USB hardware accessory (barcode scanner, cash drawer), try connecting a different USB hardware accessory to the hardware hub. Hardware Hub Connectivity Troubleshooting Make sure to unplug the Ethernet cable since the device will default to using Ethernet connection over Wi-Fi if both are available. If you have a Wi-Fi network available, unplug the Ethernet cable and switch to Wi-Fi in Settings. Test your modem and/or router by plugging in other devices (such as a laptop) and seeing if they connect to the internet.

If you don’t see the Ethernet network status indicator, try unplugging and plugging in the cable from the Ethernet port on the hardware hub and from the router or modem. Ethernet TroubleshootingĬonfirm Square Terminal is connected to Ethernet.Ĭonfirm that you can see the Ethernet network status indicator in the top right corner of the status bar. If you have an Ethernet connection available and have purchased Hub for Square Terminal, switch to Ethernet by plugging in your Ethernet cable to the port on the hub. Depending on the position of your router, you may need to move your Square Terminal closer to your router. The Wi-Fi status indicator in the upper right corner of the status bar should have 3-4 white bars to indicate a strong signal. A captive portal is a network that requires you to agree to terms or conditions to access the internet connection (these networks are common at coffee shops, airports, and other public internet access points).Ĭonfirm that you have a strong Wi-Fi signal by checking other devices (such as phones, tablets or laptops) on your network near the location of your Square Terminal.

Keep in mind, you won’t be able to connect your Square Terminal to a captive portal network. Confirm that you see the Wi-Fi status indicator on the top right corner of the status bar. Toggle Wifi off and on in Settings > Hardware > Network and check to make sure that you see a checkmark next to the network to which you are trying to connect. Square Terminal is only available in the United States, Canada, United Kingdom, Japan, and Australia at this time.Ĭonfirm Square Terminal is connected to Wifi. Select Hardware > General > Date and Time and adjust accordingly.

#Clear cache on mac for wifi access points update#

If they are wrong, please update them via the Settings section. Make sure your device’s date and time are accurate.

#Clear cache on mac for wifi access points software#

If you don’t see the option to update your software then you are all set. Tap General > About Terminal > Software Update. To update your Square Terminal software, tap the three horizontal lines in the upper left hand corner and select Settings > Hardware. Make sure your device has the latest software. You can fully charge your Square Terminal in under 5 hours. Double check the battery symbol in the upper right hand corner to see your battery level. Please make sure to walk through the following before going through issue-specific troubleshooting steps: There is a list of basic checks you can do for many issues you may encounter with Square Terminal. General Troubleshooting Wi-Fi Troubleshooting Ethernet Troubleshooting Hardware Hub Connectivity Troubleshooting Payment Troubleshooting Reset your Terminal Network Requirements MAC Addresses Cleaning your Terminal General Troubleshooting